HLK PM01 5V/3W Switch Mode Power Supply (SMPS) Module

(1 customer review)

249.00 Excluding GST

HLK-PM01 5V/3W Switch Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from  120V AC – 230V AC and has a power rating of 3 Watt. This makes it perfect for small projects that needs a 5 volt supply from mains.

Availability: 20 in stock

SKU: HLK-PM01 Category:

HLK-PM01 5V/3W Switch Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from  120V AC – 230V AC and has a power rating of 3 Watt. This makes it perfect for small projects that needs a 5 volt supply from mains. There are many advantages for these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc.

This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries.

Product features

1. Ultra-thin, ultra-small, smallest volume;
2. Global universal input voltage (90~265Vac)
3. Low power consumption, green environmental protection, no-load loss<0.1W
4. Low ripple, low noise
5. High output short circuit and over-current protection and self recovery
6. High efficiency, high power density
7. Input and output isolation voltage 3000Vac
8. 100% full load aging and testing
9. High reliability, long life design, continuous working time is greater than 100,000 hours;
10. Meet UL, CE requirements; product design to meet EMC and safety testing requirement;
11. Using high-quality environmentally friendly waterproof plastic potting, moisture, vibration, water and dust to meet IP65 standards
12. Economic solutions, cost-effective
13. Work without external circuit

Environmental conditions

Items Technical Parameters Units Notes
Working temperature -25—+60
Storage temperature -40—+80
Relative humidity 5—95 %
Thermal methods Natural cooling
Atmospheric pressure 80—106 Kpa
Altitude ≤2000 m
Vibration Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes Meets requirements for secondary road transportation

Electrical characteristics

Items Technical Parameters Units Notes
Rated input voltage 100-240 Vac
Input voltage range 85-265 Vac or 70-350Vdc
The maximum input
current
≤0.1 A
Input inrush current ≤10 A
Input low start ≤50 mS
Long-term reliability MTBF≥100, 000 h
External fuse
recommended
1A / 250Vac or 10Ω wire wound resistance

Country of Origin : China

1 review for HLK PM01 5V/3W Switch Mode Power Supply (SMPS) Module

  1. tanmay swami

    good quality

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart